| In order to have your uniform looking better, for longer, please pay careful attention to the washing tips we advise. It is also important that you pass this information on to your student's parents. The most important tips to remember are: |
| • |
Follow the care instructions inside each garment |
| • |
Wash garments made of like fabric and colors together |
| • |
Wash garments before they are worn (for colour fastness and comfort). |
| • |
Pre-treat any stains on items before washing (machine washing and drying without pre-treating may set stains permanently). |
| • |
Do not put undiluted washing powder directly onto your washing as spot bleaching can occur (dissolve the powder into water before adding garments). |
| • |
Chlorine bleach and pre-soaks are not recommended. We recommend NapiSanPlus®. |
| • |
Never hang your garments out in direct sunlight. |
| • |
Always fasten all zips, buttons and studs prior to washing so that they don't damage the garments or get caught during the wash cycle; |
| • |
When washing, use warm or even cold water; |
| • |
To protect the colour of your garments always wash them inside out; |
|
How to care for your uniform?
Always read the care label that is sewn onto the garment first. Washing hints are also outlined on the attached swing ticket.
Stains
The sooner you treat a stain, the better. The longer it sits, the more time it has to work itself into the fibers. Immediately diluting stains in cold water is often the best remedy.
Drying
Avoid using a clothes drier wherever possible. If this is unavoidable, always use the cool setting. Using the drier can cause shrinkage and your garments won't last as long. Always hang your washing inside out in the shade and try to avoid the clothesline on hot days of 30°C or more.
Ironing
If you have a print on your garment, always press the garment before the first wash (except nylon garments). This will help extend the life of the logo. For nylon garments, a piece of fabric should be placed between the iron and the print.
Hot iron settings are also responsible for pilling, shrinkage and colour loss. A warm setting is preferred.
|
|
